Liquid Absorption Roller
Product ID: Liquid Absorption Roller - 03
Recognized as an established, Taiwan-based supplier and manufacturer in the rubber industry, E-Ton Co., Ltd. has been offering its customers quality rubber, and machinery for plastic industry since 2002. With both advanced technology and professionalism, the supplier is sure to meet each customer's demand.
Steel, non-ferrous metal, film, substrate and etc. fluid effect treatment. Water removal after washing before drying, reduce drying time, save energy, avoid mark generation due to solution residue on material, or forced drying and cause material deformation.
- Treatment Speed: Within 300m/min
- Standard ROLL Size: Max. 2,500mm long
- Patented product.
- Treatment: Homogenous absorption or homogenous coating, and sucked conveying.
- Save Time / Save Labor: Allow high speed suction, save drying time, the drained fluid can be recover for recycle by you.
- Shaft: Durable dedicated by SUS made.
- Principle of Action: ROLL is made of special material, using the porosity of the material to absorb the fluid extensively, and use water sealed pump to pump in and out.
- Treatment speed
- Within 300m / min.
- Standard ROLL size
- Max 2500mm long.
- Major Application
- Water removal after washing before drying.
- Fluid removal after draw & press and before de-grease washing.
- Fluid removal while de-grease & de-acid.
- Homogenous coating of fluid.
- Absorbed delivery.
- Attention
- Contact material only while handling to prevent distortion.
- Please used frequently to prevent blockage of capillary or clean the pour by using reverse washing.
Contact Details
CEO: Mr. J.C. Wang
Sales Contact: CEO J.C. Wang
Minimum Order:Negotiable
Address:No. 25, Alley 26, Lane 1, Sinyi Rd., Banciao City Taipei County, 220 Taiwan
Tel:886-2-89533850
Fax:886-2-89533852
E-mail:
rich.prepare@msa.hinet.net
